940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
Checking Throttle Pulley
Inspect/adjust throttle pulley and cable
Pulley should turn easily without sticking.
Cable should be taut in idling position without preventing pulley from bearing against idling stop.
Adjust as required.
Press accelerator to floor and check that pulley rotates to meet full-load stop.
Connect and inspect/adjust link rod
Insert 1 mm (0.04 in) feeler gauge between projection on throttle pulley and idling stop.
Clearance between throttle lever and adjuster should now be 0.2 ± 0.1 mm (0.008 ± 0.004 in)
Adjust link rod as required.
Check throttle switch. Switch must open immediately when link rod lifts.
