940 L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1992)
Important:
Sign the notch in the EPROM with the notch in the socket base.
Carefully locate the EPROM and press it down with the insertion tool. Do not press the button. Remove the tool and check that all pins are correctly
located in the socket.
Install the EPROM cover. It must be securely closed.
Install the control unit cover carefully.
Bend the tabs down using ESD approved pliers.
Caution:
To avoid damaging internal components, DO NOT use excessive force on the case when closing it. Do not, under any circumstances, bang or
hammer on the control unit. Do not place it in a vise.
Make sure that the cover is secure and all tabs are tight.
Write date and dealer code under the figures on the new "Volvo" ID No. label, and place it on the top of the the existing "Volvo" ID No. label on the