volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Engine Performance - Idle Speed Dip|Page 7155 > < Engine Performance - Idle Speed Dip
Page 2
background image

Replacement of EPROM

EPROM kit contents:

-

EPROM

-

Sticker "Scrap"

-

Sticker "Volvo ID No. -"(9434245-8, 9434246-6 or 9434247-4)

Method:

Turn ignition off 

Remove control unit fuse no 1.

Disconnect the connector from the control module.

IMPORTANT

To avoid damage to the control module, ensure that there is no power to the control module when connecting or disconnecting the connector.

Remove the screws retaining the control module. 

Remove the control module from vehicle.

Work area and special tools

Carry out the replacement the EPROM in a permanent working area not directly attached to the workshops. The location must be clean, e.g. free from
dust, dirt, oil, solvents, etc. The work must be carried out on a static dissipation mat. The mat must be kept clean and be grounded by connecting it to a

Engine Performance - Idle Speed Dip|Page 7155 > < Engine Performance - Idle Speed Dip