940 L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1992)
Cover Plate Gasket
4. Replace gasket under oil passage cover plate.
5. Install governor in reverse order to dismantling.
-
Insert screw and retainer.
Torque: 4-5 Nm (3-3.5 ft.lb)
-
Install spring. Remount drive flange. Apply locking compound to center bolt. Reconnect propeller shaft.
Torques:
Rear extension housing: 27-47 Nm (20-35 ft.lb)
Drive flange: 40-50 Nm (30-37 ft.lb)
6. Add approx. 1 dl of fluid and check level.
CAUTION: Use correct grade of fluid.