940 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Removing Protective Sleeve
5.
Remove connector protective sleeve and reinstall fuse #1 for testing.
CAUTION:^ Never check connections from the front. Connectors can get damaged and worsen the problem.
^ Check connections through the holes in the connector.
^ Connection pin numbers are printed on the connector side.
Checking Pin 4
6.
Check diagnostic socket by connecting a voltmeter between pin 4 at ECU connector and ground.
Reading: approx. 12 volts
7.
If not, check wiring to fuse box and fuse #1. Repair as needed.
Selector Cable In Output 2
8.
Turn ignition ON.