940 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
-
clip securing cover to backrest cushion at middle
Install A9
-
armrest cover panel (secured by screws at rear)
-
armrest. Tighten bolts to 5 N-m (3.5 ft.lb)
Install/attach: A10
-
cover to backrest cushion
-
clips
-
corner protectors
-
cover buttons
-
outer headrest retraction link
Install backrest cushion A11
See A1 and A2.
Center seat belt reel, replacement
First carry out operations A1 and A2. B1
Remainder of procedure is as follows:
Remove: B2
-
cover clips and buttons
-
seat belt protector
-
corner protectors
Open zip and fold back upholstery B3
Remove: B4
-
screws (three) in armrest cover panel
-
armrest (secured by means of two screws at front)
Remove: B5
-
center headrest plate (held by four screws)
-
clip rod securing cover to center headrest plate
-
center seat belt cover panel and belt
Installation
Install/attach: B6
-
seat belt. Tighten bolts to 30 N-m (22 ft.lb)
-
cover to armrest with clips and clip rod
-
center headrest plate