940 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
-
armrest cover panel (secured by screws at rear)
Install armrest B7
Tighten bolts to 5 N-m (3.5 ft.lb)
Install/attach: B8
-
seat belt cover panel
-
cover to backrest cushion
-
clips
-
corner protectors
-
buttons
Install backrest cushion B9
See A1 and A2.
Rear seat, replacement of seat cushion catches
Remove seat cushion C1
Left-hand section is secured by two nuts, right-hand section by one. Tilt cushion forward and lift up.
Remove: C2
-
protector screws (two)
-
upholstery plugs (two)
-
catch cover
Open zip C3
Drill out pop rivets C4
Remove seat catch from underneath C5
To replace catch, proceed to D3.
Rear seat cover, replacement