940 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Steering Gear: Service and Repair
Disassembly/Assembly
DISASSEMBLY
Fig. 6 Disassembled View Of ZF Power Steering Gear
Some ZF steering gears come with a removable valve housing.
1.
Remove steering rack assembly from vehicle, then using tool No. 5046, mount unit in vise.
2.
Loosen both side rubber bellows and drain oil, Fig. 6.
3.
Loosen locknut, unscrew and remove left ball stud, locknut and bellow.
4.
Unstake and unscrew steering rod.
5.
Remove oil pipes.
6.
Remove cover for pre-tensioning device. Remove pre-tensioning piston, O-ring and spring.
7.
Remove pinion housing dust shield from pinion shaft.
8.
Remove pinion housing cover, seal and O-ring.
9.
Remove pinion, upper roller bearing, lower washer and thrust bearing.
10.
Scribe marks on center tube and housing for installation.
