940 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Windshield Washer Reservoir: Service and Repair
Washer Reservoir Replacement
-
Remove air cleaner.
-
Remove sensor.
-
Disconnect leads from pump and remove hose.
5-door models have 2 pumps.
-
Cut off lead tie and raise top-up tube.
-
Lift away reservoir.
-
If the pump is working satisfactorily transfer it to the new reservoir.
-
Replace reservoir if it is damaged. Otherwise rinse it out, clean and fit a new top-up filter.
-
Reassemble in reverse order.
Some top-up tubes have a small triangular mark at the top which should be located rearwards.
-
Fit new lead tie.
-
Fill reservoir with fluid. Check for leaks and test.