940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
11. Reconnect leads to:
-
blower motor
-
ambient temperature sensor
-
power stage
-
control module (if applicable).
-
Reconnect positive terminal strip.
In engine compartment:
12. Remove plastic cover over right-hand side of windshield wiper well.
13. Pry up cover and pull out rubber bellows. Seal around bellows with butyl tape. Reinstall cover.
14. Remount climate unit on firewall.
15. Install foam rubber seal and plate washer on evaporator and heater penetration.
16. Reconnect pipes and hoses to evaporator and heater.