960 L6-3.0L VIN 95 B6304F (1993)
When the car is parked with ignition key removed the anti-theft LED will flash.
To Enter The Code
After installation or when the set has been disconnected from power, the set displays "codE" when it is switched on. Enter the 4-digit code using the
preset buttons. If the correct code is entered, "on" is displayed and the set is ready to use.
If you enter an incorrect code you must enter the correct code again from the beginning.
Incorrect Code
If an incorrect code has been entered "rPt" is displayed. Enter the correct code. After three unsuccessful coding attempts the set will lock and remain
locked for two hours. "OFF" is displayed.
After two hours have elapsed, re-enter the correct code.
Note: During the two hours waiting period the set must be connected and turned on.