960 L6-3.0L VIN 95 B6304F (1993)
3. Press piston carefully to bottom of piston housing, ensuring that dust seal is seated in groove in piston. Install bleeding nipples. Tighten lower
nipple to 4.5 Nm (3.5 ft. lbs.).
4. Lubricate guide pins and sealing grooves for rubber gaiters in caliper retainer. Use silicone grease. Inspect gaiters and replace if in poor condition.
5. Install guide pins in caliper retainer caliper in retainer upper guide pin retaining bolt. Do not tighten bolt at this point. Use new Guide Din
retaining bolts.
