960 L6-3.0L VIN 95 B6304F (1993)
Knock Sensor: Service and Repair
Front Knock Sensor
FRONT KNOCK SENSOR REPLACEMENT
Preparations
^
Remove:
-
Air filter cover.
-
Mass Air Flow Sensor.
-
Fresh air hose.
Removal of Knock Sensor
^
Remove:
-
Connector from Knock Sensor.
-
Knock Sensor.
Installation of Knock Sensor
^
Fit:
-
Knock Sensor and tighten.
-
Connector on Knock Sensor.
Tightening torque 20 Nm (15 ft lb).
NOTE: Front Knock Sensor should be tightened in 5 o'clock position.
Installation
^
Fit:
-
Fresh air hose.
-
Mass Air Flow Sensor.
-
Air filter cover.