960 L6-3.0L VIN 95 B6304F (1993)
EGR Valve: Service and Repair
EGR VALVE REPLACEMENT
Change Starter Motor
^
Remove starter motor and oil dipstick pipe.
Removal of EGR Valve
^
Slack off pipe connections to EGR valve.
^
Slack off EGR valve screws and remove valve and seal.
^
Remove EGR temperature sensor from old EGR valve. Carefully clean sensor.
Installation of EGR Valve
^
Fit EGR temperature sensor to new EGR valve.
^
Connect EGR valve to pipe.
^
Connect EGR valve to Intake manifold with a new gasket.
^
Tighten EGR valve pipe connector.
Tightening torque 50 Nm (37 ft lb).
Installation of Starter Motor
^
Fit starter motor and oil dipstick pipe.