960 L6-3.0L VIN 95 B6304F (1993)
Fuel Pressure Regulator: Service and Repair
Fuel Rail Mounted Regulator
FUEL PRESSURE REGULATOR REPLACEMENT
Removal
^
Switch Ignition OFF.
^
Fuel pumps should be turned OFF.
^
Slack off cruise control vacuum reservoir from its mounting.
^
Remove injector covers.
^
Slack off connections from injectors.
^
Turn injector 90°.
^
Fit tool P/N 9995471 over injectors which are not to be changed.
Change Pressure Regulator
^
Remove fuel rail retaining screws.
^
Lift off fuel rail complete with injectors.
NOTE: Protect all damping rubbers in intake manifold.
^
Place shop rag under pressure regulator to soak up any fuel spillage when pressure regulator is slacked off.
^
Slack off vacuum hose and return lead from pressure regulator.
^
Change pressure regulator.
^
Grease new pressure regulator O-rings with petroleum jelly before fitting.