960 L6-3.0L VIN 95 B6304F (1993)
Engine Control Module: Service and Repair
ENGINE CONTROL MODULE REPLACEMENT
When Changing Engine Control Module, Remember to:
^
Check Engine Control Module (ECM) and connector for damage to pins or sleeves. Faults could be caused by this.
ECM Is Located Behind Driver's Side Kick Panel
Removal of ECM
^
Ignition OFF.
^
Disconnect fuse 24.
^
Remove sound insulation and left front valance.
^
Remove ECM.
Installation of New ECM
^
Check ECM and connectors for damage to pins and sleeves.
^
Fit new ECM.
^
Replace sound insulation and left front valance.
^
Replace fuse.