960 L6-3.0L VIN 95 B6304F (1993)
Air Bag: Service and Repair
Passenger Side Airbag
1. Disarm SRS as described under "Air Bag System Disarming and Arming".
2. Remove trim from above glove compartment.
3. Disconnect connector from below passengers air bag.
Fig. 20 Passengers Air Bag Module Attaching Screws
Fig. 21 Passengers Air Bag Module Attachments
4. Remove two air bag unit attaching screws, then remove air bag module, Fig. .
5. Reverse procedure to install. After completing installation, arm SRS as described under "Air Bag System Disarming and Arming".
