960 L6-3.0L VIN 95 B6304F (1993)
Install the rear joint to flange
Use new bolts.
Tighten bolts crosswise to 60 Nm (44 ft.lbs.).
Install front joint.
Use new bolts and nuts.
Tighten bolts crosswise to 50 Nm (37 ft.lbs).
Use tool 999 5244.
Tighten center bearing member and center bearing bolts
Tightening torques 25 Nm (18 ft.lbs)
Install fuel tank support
Tightening torques 25 Nm (18 ft.lbs).
Fill final drive with oil according to specification.
