C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Note! Take care to ensure that the activator has dried, a minimum of 10 minutes and a maximum of 30 minutes, before painting.
-
Paint the sensors the same color as the vehicle. Use Volvo recommended paint. Paint a maximum of two layers (1 base coat and 1 varnish coat).
-
Protect the connection's contact surfaces from paint. Too many layers of paint can result in the function partially or totally disappearing.
-
Reinstall the rubber ring on the sensors when the paint has dried.
-
Turn the ignition key to position 0.
Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.
-
Remove the 3 x screws on the rear bumper cover's end.
-
Repeat the operation on the other side.