volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Parking Assistance, Front|Page 13802 > < Parking Assistance, Front|Page 13800
Page 4
background image

-

Remove the tailgate's 2 x stops by turning them a quarter turn and pulling straight up.

-

Apply a piece of tape to the wing edge on the right and left-hand side to protect the edge when the corner of the bumper cover is removed.

-

Remove the bumper cover from the body by carefully prying off the ends using a weatherstrip tool.

-

Pull the cover from the tail lamp and rear edge of the wing on each side. It is secured by four catches at the tail lamp and four at the rear edge of
the rear wing.

-

Pull the bumper cover straight back.

Parking Assistance, Front|Page 13802 > < Parking Assistance, Front|Page 13800