C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Take the relay and 2 thick pieces of foam tape from the kit.
-
Connect the pre-routed cable harness B and cable harness C to the relay.
-
Fit 2 pieces of tape around the relay.
-
Detach the large green connector from the amplifier.
Note! The location of the connector differs depending on the type of amplifier in the car.
-
Connect the green connector (1) from cable harness C, to the corresponding socket in the amplifier.
-
Connect the green connector (2) from cable harness C, to the green connector (3) that was disconnected from the amplifier.
-
Take one of the cut pieces of foam tape and tape around connectors (2) and (3).
