C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Reinstall the panel and ensure that all clips engage.
Note! There are eleven clips on the reverse of the panel that must engage in the body. Take care when aligning so that the clips do not
break. Broken clips must be replaced with new ones.
-
Tighten the panel using existing screws.
-
The image shows the location of the clips on the rear of the panel.
-
Remove the two parts of the cut-off safety clip.
-
Take a new safety clip (D) from the kit, depress it and install it on the B pillar panel.
-
Reinstall the panel and weatherstrip.
