C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Remove the bumper cover from the body by carefully prying off the ends using a weatherstrip tool.
-
Pull the cover from the tail lamp and rear edge of the wing on each side. It is secured by four catches at the tail lamp and four at the rear edge of
the rear wing.
-
Pull the bumper cover straight back.
-
Disconnect the connector for the license plate lighting on the left-hand side.
-
Place the bumper cover on a protective surface.
-
Remove the pieces of tape.
-
Locate the 4 x markings on the inside of the bumper cover.
-
Mark center with a scribe.