C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Take the 4 x holders from the kit.
-
Clean the surfaces as illustrated using a cleaning cloth P/N 9192678.
-
Allow to dry.
-
Apply a thin and even layer of activatorpart no. 8637076, on the cleaned surfaces and let dry for at least 10 min.
-
Pull off the seat cushion for the rear seat, first at the rear edge where it is secured by one holder. Then at the front edge where it is secured by two
holders.
-
Remove the seat cushion.
Applies to right-hand drive cars:
-
Steps 51-62 must not be mirrored.
-
Fold the central arm rest forward.
-
Remove the central arm rest by grasping each end and pulling upwards until it releases at the rear edge from the backrest's lugs (1).
-
Then pull forwards until the holders (2) on the sides of the backrest have slid out of the corresponding cut-out (3) in the central arm rest.
