C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Mark for drilling the radiated heat shield through the four holes in the lower section of the body and in the radiated heat shield. Mark the middle of
the holes by pressing through the panel using a scriber.
Note! The radiated heat shield has sharp edges.
-
Detach the muffler's bracket on the left and right-hand side and lower to stop.
-
Remove the two screws for the radiated heat shield on the left and right-hand side and fold it down so that the markings are visible.