C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Apply tape to the outside of the bumper cover, opposite the markings on the inside and right up to the first joint line on the lower section of the
bumper cover. This is in order to protect the paintwork from the base of the saw when sawing out the cut-out for the towbar.
-
Saw out the slot acc. to the raised marking.
Note! Do not damage the painted surface of the bumper cover. Cut so that the raised edge on the inside remains. The raised edge marks
the cut-out.
-
Smooth off the sawn edges with a fine toothed file.
-
Remove the masking tape.
This step also applies to cars equipped with body kit.
Illustration A
