volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Trailer Hitch|Part 1|Page 16467 > < Trailer Hitch|Part 1|Page 16465
Page 8
background image

-

Replace broken clips.

-

Press the panel into place and ensure that all clips engage.

Note! There are eleven clips on the rear of the panel that secure to the body. Take care not to snap the clips when aligning.

-

Tighten the panel using existing screws.

Illustration A

-

The image shows the location of the clips on the rear of the panel.

-

Detach the black plastic clip on the inside at the front edge using a screwdriver. Replace the clip with a new one and reinstall the B post panel. In
the event of a new installation, the new clip is in the tow hitch cabling kit.

Trailer Hitch|Part 1|Page 16467 > < Trailer Hitch|Part 1|Page 16465