volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Spoiler Rear|Page 18598 > < Spoiler Rear|Page 18596
Page 6
background image

-

Lubricate the washer hose lightly with low-temperature grease part no. 1161761 by the rubber lead through. Pull the washer hose in and out a few
times so that it is easier to pull through and to avoid folds when the spoiler is installed.

Note! Make sure that no grease ends up on surfaces on the spoiler and tailgate where the adhesive is to be applied.

Note! Get help from a colleague to carry out steps 12-24.

-

Open the tailgate. Get the new spoiler and insert the rubber lead through with hose and cables through the hole in the tailgate.

-

Fasten the rubber lead through on both sides of the tailgate.

-

Place a rag over the tailgate's lock in the sill so that it does not close.

-

Lower the tailgate.

-

Hook on the spoiler's three clip attachments around the metal edge on the top part of the tailgate.

Spoiler Rear|Page 18598 > < Spoiler Rear|Page 18596