C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove:
-
the 2 screws for the bracket
-
the bracket from the hydraulic modulator.
Note! Working with the hydraulic modulator requires a very clean environment. The hydraulic modulator must not be opened under any
circumstances. When removing the brake control module (BCM), see: Anti-lock Brake System Module (ABS) See: Electronic Brake Control
Module/Service and Repair/Anti-lock Brake System Module (ABS).
Installation
Note! For tightening torques, see: Specifications See: Specifications/Tightening Torque.
Installing the hydraulic modulator
Note! The ABS hydraulic modulator is filled with brake fluid. It is important that the plugs are not removed until the brake tubes are to be
connected.
Install:
-
the bracket
-
the 2 screws.
-
the hydraulic modulator
-
the 1 M6 screw
-
the connector on the brake control module (BCM).
Installing the brake pipes