C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Bleeding brake systems
Remove the pedal jack.
Bleed the brake system. See: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding
Check that the brake pipe connections are sealed.
Check the brake fluid level
Installing the SIPS member
Install:
-
the SIPS member
-
the two M10 screws (3)
-
the plastic nut (2)
-
the clips for the heated oxygen sensor (HO2S) wiring (1).
Installing the heat deflector plate for the cowl panel
Install the heat deflector plate
Brake Pipes Rear Wheel, Replacing
Brake pipes rear wheel, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
