C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Inspection 2:
Pull the lever up a minimum of 4 notches and
release the lever without touching the button
so that it rests on the catch. Lift the lever 5
mm (0.20") and push in the button. The lever
should now be able to be returned to the
bottom position with the button pushed in.
If this is not possible, adjust according to the
Adjustment section.
The depth gage of vernier or digital calipers
should be used at the center of the button to
make this measurement.