C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove:
-
the screw holding the water pump and rubber mounting. See the illustration
-
the connector.
Pull the water pump forward a little.
Hint: Mark the location of the hoses at a suitable point on the water pump.
Install hose clips on both coolant hoses, as close to the water pump as possible. Position a container under the water pump.
Disconnect the hoses.
Installation
Note! For tightening torques, see: Specifications See: Body and Frame/Specifications.
Installing the water pump