volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Passenger Compartment Connector Socket|Page 3280 > < Passenger Compartment Connector Socket|Page 3278
Page 19
background image

-

Install the holder with the connected timer relay with the hose clamp. Ensure that the timer relay is centered on the stay and is secure, so that it
does not drop down and become trapped by the anti-roll bar.

Illustration B

-

Check that the same dimensions as in the image are used.

-

If the cables for the front intake and engine block heater are disconnected, reinstall them in their clamps.

-

Route the ground lead (1) from the timer relay to the ground terminal for the front intake.

Passenger Compartment Connector Socket|Page 3280 > < Passenger Compartment Connector Socket|Page 3278