C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Use new seals.
Grease the seals before installation.
Install:
-
the oil cooler. Screw the 4 oil cooler screws into place. Tighten
-
the coolant hoses using new clamps. Remove the lock grip pliers. Screw the splash guard into place.
Finishing
Checks
check:
-
the engine oil level
-
the coolant level.
Check for leakage as follows:
Start the engine and run it to operating temperature. Then check that there is no leakage.
Check if the oil or coolant needs topping up.