C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Note! The timing belt pulley can only be installed in one position in case of splines on the crankshaft journal, see illustration.
Carefully tap in the timing belt pulley with a plastic mallet.
Installing the timing belt
Install the new belt in the following order:
-
the crankshaft
-
the idler pulley
-
camshaft pulley
-
the water pump
-
belt tensioner.
Pull out the pin.
Check that the tensioner tensions the belt,
Tighten the centre screws that hold the VVT-units on both camshafts. Tighten according to: Tightening torque. See: Specifications/Mechanical
Specifications/Tightening Torque
Install the plugs for the VVT-units. Tighten according to: Tightening torque. See: Specifications/Mechanical Specifications/Tightening Torque.
