C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Disconnect the connector.
Hint: Use a small electrician's screwdriver to pry up the connector by the lock. Depress the connector at the rear edge. Pull straight out.
Remove:
-
the 3 screws
-
the control module.
Installation
Installing the damper motor module (DMM) for air distribution
Check the function. Lubricate the air distribution damper mechanism if necessary.
Adjust the mechanism (1) to its rearmost position.
Install:
-
control module (3) so that the gear wheels correspond as illustrated (2)
-
the 2 x screws. Tighten crosswise
-
the switch. Ensure that it is correctly positioned.