volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Auxiliary Cabin Heater Exhaust Pipe|Service and Repair|Page 11755 > < Auxiliary Cabin Heater Control Module|Service and Repair|Page 11751
Page 1
background image

Auxiliary Cabin Heater Exhaust Pipe: Service and Repair

Fuel Fired Booster Heater Exhaust Pipe

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparatory work

Removing components

Remove:

-

the EVAP canister hose (1) from the intake manifold

-

the intake manifold (2) between the air cleaner (ACL) and the turbocharger (TC).

Remove:

-

the hose clamps at the mass air flow (MAF) sensor

-

the hose clamps at the turbocharger (TC)

-

the screws for the intake manifold in the cylinder head.

Removal

Removing the exhaust pipe for the engine coolant heater

Auxiliary Cabin Heater Exhaust Pipe|Service and Repair|Page 11755 > < Auxiliary Cabin Heater Control Module|Service and Repair|Page 11751