C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Note! Pull the insulation for the pipes as far in towards the evaporator as possible before installing the spacer and the right-hand half of the
lead-in.
Install:
-
the spacer that holds the heat exchanger and evaporator pipes apart
-
the right-hand half of the lead-in using the 2 screws.
Installing components
Install:
-
the M8 screw securing the air conditioning (A/C) pipes in the engine compartment. See: Tightening torque See: Body and Frame/Specifications
-
the heat exchanger. For vehicles with split pipes, see: Heat exchanger, R.H.D See: Heater Core/Service and Repair and for vehicles with
complete pipes, see: Heat exchanger, R.H.D See: Heater Core/Service and Repair
-
the brake pedal. See: Pedal box, brake See: Brakes and Traction Control/Brake Pedal Assy/Service and Repair/Pedal Box, Brake
-
the steering shaft. See: Steering column See: Steering and Suspension/Steering/Steering Column/Service and Repair.
Finishing
Checking the function and leak tracing
Vacuum pump the air conditioning (A/C) system. See: Vacuum pumping See: Service and Repair/Vacuum Pumping.
Fill the air conditioning (A/C) system with refrigerant. See: Refrigerant, filling See: Service and Repair/Refrigerant, Filling.
Leak trace the air conditioning (A/C) system. See: Leak detection, tracer agent See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Detection, Tracer Agent or: Leak tracing, electronic leak tracer See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Tracing, Electronic Leak Tracer.
