C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Heater Core: Service and Repair
Heat Exchanger, R.H.D
Heat exchanger
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Draining coolant and removing the engine splash guard.
Remove:
-
the cover for the expansion tank and raise the vehicle
-
the engine splash guard.
Attach a hose on the nipple at the radiator and lower the hose to a container.
Open the nipple and drain off the coolant.
Lower the vehicle.
Detach the radiator hoses from the engine compartment.
Turn the radiator hose connection counter-clockwise to the end position and then pull off the radiator hose.
Removal
Remove:
-
the tunnel compartment. See: Floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console
-
the soundproofing panel on the driver's side. See: Instrument panel lower See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel Lower.