C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Disconnect the refrigerant connection from the service valve.
Screw the service valve cap into place.
Position the cover plate.
Insert the air intake and the screw (B). Tighten.
Screw the right-hand part of the cover plate using 2 screws (A) by the rubber for vertical adjustment of the hood. Tighten.
Filling with refrigerant
Fill refrigerant via the service valve on the low pressure side (LP) as required. See: Refrigerant, filling See: Service and Repair/Refrigerant, Filling.
