volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Refrigerant Pressure Sensor / Switch, HVAC > < Overview, Climate Control Unit|Page 12301
Page 2
background image

Turn the temperature sensor together with the cable harness a 1/4 turn clockwise.
Pull the temperature sensor straight out.
Remove the temperature sensor.

Remove the connector.

Installation

Installing the temperature sensor for the evaporator

Connect the connector.

Align the hooks for the temperature sensor in the opening so that the connector is turned down.
Place the temperature sensor down against the surface of the heater unit. Turn the temperature sensor a 1/4 turn counter-clockwise.

Finishing

Testing the climate control system

Carry out a performance test on the climate control unit. See: Climate control system, check.

Refrigerant Pressure Sensor / Switch, HVAC > < Overview, Climate Control Unit|Page 12301