C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Manifold Pressure/Vacuum Sensor: Service and Repair
Temperature and manifold absolute pressure sensor (MAPT)
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the Front Bumper cover
Remove the front bumper cover. See: Cover bumper front. .
Removing the Pressure and Temperature sensor
Disconnect the connector for the sensor.
Remove:
-
the screw for the sensor
-
the sensor.
Installation
Note! For tightening torques, see: Specifications. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque.
Installing the Pressure and Temperature sensor
Install:
Hint: Use petroleum jelly or similar on the O-ring to make installation easier.
the sensor
-
the screw for the sensor. Tighten. Connect the connector for the sensor.
Installing the front bumper cover
-
Install the front bumper cover. See: Cover bumper front. .