C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Install:
-
the starter motor
-
the screws for the starter motor. Tighten. See: Tightening torque. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque
-
the battery positive cable to the starter motor. Tighten
-
the protective cover over the positive terminal on the starter motor
-
the flat pin contactor to the starter motor solenoid
-
the bracket to the coolant hose. Tighten the nuts. Insert the coolant hose in the bracket.
Finishing
Installing the air cleaner (ACL) module
Install the air cleaner (ACL) module. See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair
Installing the battery negative cable
Connect the battery negative cable. See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Checks
Start the engine. Check for leakage. Check the engine function.
