C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Fuel Rail: Service and Repair
Fuel injection supply manifold
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing components
Remove the air cleaner (ACL) module. See: Fuel system pressure release, B5254T7 .
Drain the fuel system. See: Air filter module. See: Air Cleaner Housing/Service and Repair.
Remove the hose clamp for the rubber hose on the throttle body (TB). Move the hose to one side.
Disconnect the throttle body (TB) connector.
Removal
Removing upper intake manifold
Remove the 6 screws for the upper section of the intake manifold. Move the manifold to one side.
Removing the fuel rail