C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Image A applies to the S40 (04-)/V50, Image B applies to the C70 (06-)/C30
-
Make a small T-shape cut in the floor carpet, equally as wide as the mounting eyelet on the mounting in the position as illustrated. Use the
mounting to mark where the small cut should be located.
Image A applies to the S40 (04-)/V50, Image B applies to the C70 (06-)/C30
-
Insert the mounting eyelet through the small cut in the floor carpet. Position the mounting over the hole and the guide pin in the seat rail with the
washer on top.
-
Reinstall the screw. Torque tighten the screw to 50 Nm (37 lbf.ft.).
-
Reinstall the cover panel over the seat mounting.