C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Drill holes in the centers of the markings using a - 3 mm (7/64") diameter drill bit.
-
Drill out the holes. Use a -10 mm (25/64") diameter drill bit.
-
Enlarge the holes in the bumper cover using hole tool P/N 9997234. Place the hole tool's support sleeve on the inside, and the cutting component
on the outside of the bumper cover.
-
Clean the inside of the bumper cover using a mild soap solution.
-
Clean around the holes and the markings using isopropanol.
-
Allow to dry.
-
Apply a thin layer of activator, part no. 8637076, to the cleaned surfaces and let dry for approx. 10 min.