C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Press the holder onto the bumper cover.
Note! The holders must be mounted turned against the holes as illustrated. The holders must also be horizontal and in line with the bumper
cover.
-
Repeat the steps 30-32 for the other holders.
-
Connect the cable harness connectors to the sensors.
-
Install the sensors in their holders.
Note! The large gray connector must be on the right-hand side. (see point 34).
-
Press the cable harness holder onto the flanges of the bumper cover.
