C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Broken clips must be replaced with new ones.
-
Tighten the panel using existing screws.
-
The image shows the location of the clips on the rear of the panel.
-
Remove the 2 x parts of the cut-off safety clip.
-
Take the safety clip from the kit, depress it and install it on the B pillar panel.
-
Reinstall the panel and weatherstrip.
Reinstall:
-
backrest - tighten the screw to 25 Nm (18.5 lbf.ft).
-
the armrest
-
cushion
-
Download the software for the accessory's function following the service information in VIDA.