C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Disconnect the connector for the license plate lighting on the left-hand side.
-
Place the bumper cover on a protective surface.
-
Remove the pieces of tape.
-
Locate the 4 x markings on the inside of the bumper cover.
-
Mark center with a scribe.
-
Drill holes in the centers of the markings using a - 3 mm (7/64") diameter drill bit.
-
Drill out the holes. Use a -10 mm (25/64") diameter drill bit.