volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Ultrasonic Sensor, Antitheft|Service and Repair|Page 965 > < Ultrasonic Sensor, Antitheft|Service and Repair|Page 963
Page 4
background image

-

Fold the seat cushion and backrest on the right-hand side of the rear seat forward.

Removing the side cushion:

-

Grip the upper edge of the right-hand side cushion (A). Pull the side cushion backwards so that the clip on the reverse releases.

-

Slide the side cushion upwards.

Removing the panel at the front/top of the side panel:

-

Remove the screw (B) at the rear edge of the panel at the front/top of the right-hand side panel.

-

Pull the panel upwards so that the four clips on the inside release.

-

Pull off the rubber strip (A) at the rear of the opening for the right-hand rear door.

Removing the lower panel on the C-post:

-

Carefully pry off the lower panel on the C-post (B) on the right-hand side. Carefully pry at the top edge. Use a plastic weatherstrip tool.

-

Pull the panel on the C-post so that the two upper clips release. Then continue pulling downwards until the last two clips release.

Removing the upper panel on the C-post:

-

Repeat for the panel on the lower C-post (C), but now three clips should release.

Ultrasonic Sensor, Antitheft|Service and Repair|Page 965 > < Ultrasonic Sensor, Antitheft|Service and Repair|Page 963